Adsorption of Scandium Ions by Amberlite XAD7HP Polymeric Adsorbent Loaded with Tri-n-Octylphosphine Oxide.

In an actual economic context, the demand for scandium has grown due to its applications in top technologies. However, further development of new technologies will lead to an increase in the market for Sc related to such technologies. The present study aims to improve and upgrade existing technology in terms of efficient scandium recovery, proposing a new material with selective adsorptive properties for scandium recovery. To highlight the impregnation of Amberlite XAD7HP resin with tri-n-octylphosphine oxide extractant by the solvent-impregnated resin method, the obtained adsorbent material was characterized by physico-chemical techniques. Further, the specific surface of the adsorbent and the zero-point charge of the adsorbent surface have been determined. Different parameters, such as initial concentration, adsorbent amount, contact time, or temperature, have been studied. The initial pH effect was investigated when a maximum adsorption capacity of 31.84 mg g-1 was obtained at pH > 3, using 0.1 g of adsorbent and a contact time of 90 min and 298 K. An attempt was made to discuss and provide a clear representation of the studied adsorption process, proposing a specific mechanism for Sc(III) recovery from aqueous solutions through kinetic, thermodynamic, and equilibrium studies. Adsorption/desorption studies reveal that the prepared adsorbent material can be reused five times.

Evaluation of Functionalized Amberlite Type XAD7 Polymeric Resin with L-Valine Amino Acid Performance for Gallium Recovery.

Given the ever-increasing demand for gallium(III) as a crucial precursor in the fabrication of advanced materials, there arises an imperative to devise efficient recovery processes from primary and secondary sources. In the present investigation, the retrieval of gallium(III) from aqueous solutions through the mechanism of adsorption was investigated. Materials with superior adsorbent properties play an important role in the dynamics of the adsorption process. To enhance these properties, select materials, such as Amberlite-type polymeric resins, are amenable to functionalization through impregnation with extractants featuring specialized active groups, designed for the selective recovery of metal ions-specifically, Ga(III). The impregnation method employed in this study is the Solvent-Impregnated Resin (SIR) method, utilizing the amino acid DL-valine as the extractant. The new material was characterized through Scanning Electron Microscopy (SEM), Elemental Analysis via X-ray energy-dispersive spectroscopy (EDX), and Fourier transform infrared spectroscopy (FTIR) to elucidate the presence of the extractant on the resin's surface. Concurrently, the material's pHPZC was determined. The adsorptive prowess of the synthesized material was investigated through kinetic, thermodynamic, and equilibrium studies. The influence of specific parameters in the adsorption process-namely, pH, contact time, temperature, and Ga(III) initial concentration-on the maximal adsorption capacity was determined. The optimal adsorption conditions were established using the Taguchi method.

Kinetic Modelling the Solid-Liquid Extraction Process of Scandium from Red Mud: Influence of Acid Composition, Contact Time and Temperature.

Industry represents a fundamental component of modern society, with the generation of massive amounts of industrial waste being the inevitable result of development activities in recent years. Red mud is an industrial waste generated during alumina production using the Bayer process of refining bauxite ore. It is a highly alkaline waste due to the incomplete removal of NaOH. There are several opinions in both the literature and legislation on the hazards of red mud. According to European and national legislation, this mud is not on the list of hazardous wastes; however, if the list of criteria are taken into account, it can be considered as hazardous. The complex processing of red mud is cost-effective because it contains elements such as iron, manganese, sodium, calcium, magnesium, zinc, strontium, lead, copper, cadmium, bismuth, barium and rare earths, especially scandium. Therefore, the selection of an extraction method depends on the form in which the element is present in solution. Extraction is one of the prospective separation and concentration methods. In this study, we evaluated the kinetic modelling of the solid-liquid acid extraction process of predominantly scandium as well as other elements present in red mud. Therefore, three acids (HCl, HNO3 and H2SO4) at different concentrations (10, 20 and 30%) were targeted for the extraction of Sc(III) from solid red mud. Specific parameters of the kinetics of the extraction process were studied, namely the solid:liquid ratio, initial acid concentration, contact time and temperature. The extraction kinetics of Sc(III) with acids was evaluated using first- and second-order kinetic models, involving kinetic parameters, rate constants, saturation concentration and activation energy. The second-order kinetic model was able to describe the mechanism of Sc(III) extraction from red mud. In addition, this study provides an overview on the mechanism of mass transfer involved in the acid extraction process of Sc(III), thereby enabling the design, optimization and control of large-scale processes for red mud recovery.

Two Cases of Congenital Hypothyroidism Revealing Thyroid Agenesis.

Congenital hypothyroidism (CH) may have major detrimental effects on growth and neurological development, but early intervention leads to excellent outcomes. CH is classified as transient or permanent, primary or secondary, with primary CH being the most common neonatal endocrine disorder. Most patients with CH do not present any typical signs and symptoms of hypothyroidism shortly after birth, partly due to transplacental maternal thyroid hormone transfer and residual neonatal thyroid function. This paper reports on two CH cases. During the initial Neonatal Intensive Care Unit (NICU) admission phase, CH was not suspected due to nonspecific signs. The distinct characteristics of our cases are as follows: both infants were admitted to the NICU for respiratory distress syndrome, requiring invasive mechanical ventilation, and both were born to diabetic mothers. Following extubation, they both showed similar neurological issues, including reduced muscle tone and feeding difficulties. Initially, those symptoms were attributed to delayed clearance of analgesic and sedative medication. However, symptoms progressively worsened over time. Subsequent tests revealed both meeting CH diagnostic criteria: an unusual ultrasound indicating thyroid agenesis and abnormal hormone levels. Guided by the pediatric endocrinology team, prompt hormonal treatment was started with improvements in neurocognitive function and feeding. Usually, CH screening involves blood samples from healthy newborns at 2-3 days of life. Abnormal results require confirmation, prompting treatment within two weeks. Certain NICU-admitted infants face higher diagnosis delays, as seen in those two cases where CH screening was postponed. Thus, for all neonates with persistent pathologies unresponsive to standard etiological treatment, conducting a comprehensive anamnestic evaluation of the medical history, along with maternal preconceptional and prenatal nutrition, is recommended.

Synthesis, Characterization and Antimicrobial Activity of Multiple Morphologies of Gold/Platinum Doped Bismuth Oxide Nanostructures.

Bismuth oxides were synthesized from bismuth carbonate using the sol-gel method. Studies have described the formation of Bi2O3, as a precursor of HNO3 dissolution, and intermediate oxides, such as BixOy when using H2SO4 and H3PO4. The average size of the crystallite calculated from Scherrer's formula ranged from 9 to 19 nm, according to X-ray diffraction. The FTIR analysis showed the presence of specific Bi2O3 bands when using HNO3 and of crystalline phases of "bismuth oxide sulphate" when using H2SO4 and "bismuth phosphate" when using H3PO4. The TG curves showed major mass losses and specific thermal effects, delimited in four temperature zones for materials synthesized with HNO3 (with loss of mass between 24% and 50%) and H2SO4 (with loss of mass between 45% and 76%), and in three temperature zones for materials synthesized with H3PO4 (with loss of mass between 13% and 43%). Further, the thermal stability indicates that materials have been improved by the addition of a polymer or polymer and carbon. Confocal laser scanning microscopy showed decreased roughness in the series, [BixOy]N > [BixOy-6% PVA]N > [BixOy-C-6% PVA]N, and increased roughness for materials [BixOy]S, [BixOy-6% PVA]S, [BixOy-C-6% PVA]S, [BixOy]P, [BixOy-6% PVA]P and [BixOy-C-6% PVA]P. The morphological analysis (electronic scanning microscopy) of the synthesized materials showed a wide variety of forms: overlapping nanoplates ([BixOy]N or [BixOy]S), clusters of angular forms ([BixOy-6% PVA]N), pillars ([BixOy-6% PVA]S-Au), needle particles ([BixOy-Au], [BixOy-6% PVA]S-Au, [BixOy-C-6% PVA]S-Au), spherical particles ([BixOy-C-6% PVA]P-Pt), 2D plates ([BixOy]P-Pt) and 3D nanometric plates ([BixOy-C-6% PVA]S-Au). For materials obtained in the first synthesis stage, antimicrobial activity increased in the series [BixOy]N > [BixOy]S > [BixOy]P. For materials synthesized in the second synthesis stage, when polymer (polyvinyl alcohol, PVA) was added, maximum antimicrobial activity, regardless of the microbial species tested, was present in the material [BixOy-6% PVA]S. For the materials synthesized in the third stage, to which graphite and 6% PVA were added, the best antimicrobial activity was in the material [BixOy-C-6% PVA]P. Materials synthesized and doped with metal ions (gold or platinum) showed significant antimicrobial activity for the tested microbial species.

Laboratory Findings in Children with Excess Body Weight in Romania.

Background and Objectives: Childhood obesity has been increasing at a worrisome pace and emerging as a non-infectious pandemic in the pediatric population in recent years. Raising awareness on this problem is of utmost importance, in order to take action to control body weight from an early age. Materials and Methods: We performed a retrospective study among overweight or obese children evaluated on an outpatient basis in the Department of Pediatric Endocrinology of a tertiary care hospital in Bucharest Romania in 2021 in order to identify laboratory changes occurring according to age and sex. Results: A total of 268 children were included in the analysis, with a median age of 10.9 years (IQR: 8.3, 13.3 years); 61.8% were obese and 38.2% overweight. We identified a subclinical pro-inflammatory status characterized by increased neutrophil count (12.7%) and increased C-reactive protein (16.4%). Biochemically, we identified the highest increases for uric acid (35.4%). More than half of the children included in the study had dyslipidemia-specific changes: high low-density lipoprotein cholesterol (LDL) (50.0%), low high-density lipoprotein cholesterol (HDL) (58.9%) and increased triglyceride levels (12.7%), especially children with a body mass-index (BMI) percentile above 95%. Increased thyroid stimulating hormone (TSH) was identified in 20.3% and low thyroxine (T4) level in 13.4%, especially in females. Conclusions: Early measures to control excess body weight are needed since preventing obesity is easier than treating it. However, this is often difficult to do in our country because parents frequently do not recognize the problem until it is advanced. Furthermore, doctors are not always adequately prepared and sometimes they do not have the support of the health systems to provide children in need with the adequate care. Educational strategies and awareness of issue should be revisited in current post-pandemic context that facilitates increase of obesity prevalence in children. Increase of efficient communication could be achieved by pointing to these objective findings.

Silver Nanoparticle Synthesis via Photochemical Reduction with Sodium Citrate.

The aim of this paper is to provide a simple and efficient photoassisted approach to synthesize silver nanoparticles, and to elucidate the role of the key factors (synthesis parameters, such as the concentration of TSC, irradiation time, and UV intensity) that play a major role in the photochemical synthesis of silver nanoparticles using TSC, both as a reducing and stabilizing agent. Concomitantly, we aim to provide an easy way to evaluate the particle size based on Mie theory. One of the key advantages of this method is that the synthesis can be "activated" whenever or wherever silver nanoparticles are needed, by premixing the reactants and irradiating the final solution with UV radiation. UV irradiance was determined by using Keitz's theory. This argument has been verified by premixing the reagents and deposited them in an enclosed space (away from sunlight) at 25 °C, then checking them for three days. Nothing happened, unless the sample was directly irradiated by UV light. Further, obtained materials were monitored for 390 days and characterized using scanning electron microscopy, UV-VIS, and transmission electron microscopy.

A Green, Simple and Facile Way to Synthesize Silver Nanoparticles Using Soluble Starch. pH Studies and Antimicrobial Applications.

Along with the progress of nanoscience and nanotechnology came the means to synthesize nanometric scale materials. While changing their physical and chemical properties, they implicitly changed their application area. The aim of this paper was the synthesis of colloidal silver nanoparticles (Ag-NPs by ultrasonic disruption), using soluble starch as a reducing agent and further as a stabilizing agent for produced Ag-NPs. In this context, an important parameter for Ag-NPs preparation is the pH, which can determine the particle size and stability. The physical-chemical behavior of the synthesized Ag-NPs (shape, size, dispersion, electric charge) is strongly influenced by the pH value (experiment being conducted for pH values in the range between 8 and 13). The presence of a peak located at 412 nm into the UV-VIS spectra demonstrates the presence of silver nano-spheres into the produced material. In UV/VIS spectra, we observed a specific peak for yellow silver nano-spheres located at 412 nm. Samples characterization was performed by scanning electron microscopy, SEM, energy-dispersive X-ray spectroscopy, EDX, Fourier-transform infrared spectroscopy, and FT-IR. For all Ag-NP samples, we determined the zeta and observed that the Ag-NP particles obtained at higher pH and have better stability. Due to the intrinsic therapeutic properties and broad antimicrobial spectrum, silver nanoparticles have opened new horizons and new approaches for the control of different types of infections and wound healing abilities. In this context, the present study also aims to confirm the antimicrobial effect of prepared Ag-NPs against several bacterial strains (indicator and clinically isolated strains). In this way, it was confirmed that the antimicrobial activity of synthesized Ag-NPs was good against Staphylococcus aureus (ATCC 25923 and S. aureus MSSA) and Escherichia coli (ATTC 25922 and clinically isolated strain). Based on this observation, we conclude that the prepared Ag-NPs can represent an alternative or auxiliary material used for controlling important nosocomial pathogens. The fungal reference strain Candida albicans was more sensitive at Ag-NPs actions (zone of inhibition = 20 mm) compared with the clinically isolated strain (zone of inhibition = 10 mm), which emphasizes the greater resistance of fungal strains at antimicrobial agent's action.

New Generation of Antibacterial Products Based on Colloidal Silver.

The main objective of the present paper is the green synthesis of colloidal silver by ultrasonication starting from silver nitrate and using soluble starch as the reducing agent. Soluble starch has been used during synthesis because it is a cheap and environmentally friendly reactive. Silver colloid has been characterized by physicochemical methods: UV-VIS spectroscopy, Scanning Electron Microscopy and Energy Dispersive X-Ray spectroscopy. This colloidal material was prepared in order to prove and establish its toxicity on heterotrophic bacteria. Toxicity tests were carried out using test cultures with and without silver colloid with different concentrations. This way was possible to establish the minimum silver concentration that presents a toxic effect against used bacteria. Quantitative evaluation of bacterial growth was performed by using the Most Probable Number method. By counting the bacterial colony number, the antibacterial effect was determined for colloidal silver deposited onto the cotton gauze by adsorption. During the present study, we optimized the adsorption specific parameters: solid:liquid ratio, temperature, contact time, colloidal silver concentration. By thermodynamic, equilibrium and kinetic studies, the adsorptive process mechanism was established.

Modified Chitosan for Silver Recovery-Kinetics, Thermodynamic, and Equilibrium Studies.

：The aim of this study is to investigate the silver recovery from aqueous solutions. There are a variety of recovery methods, such as hydrometallurgical, bio-metallurgical, cementation, reduction, electrocoagulation, electrodialysis, ion exchange, etc. Adsorption represents a convenient, environment friendly procedure, that can be used to recover silver from aqueous solutions. In this paper we highlight the silver adsorption mechanism on chitosan chemically modified with active groups, through kinetic, thermodynamic, and equilibrium studies. A maximum adsorption capacity of 103.6 mg Ag(I)/g of adsorbent for an initial concentration of 700 mg/L was noticed by using modified chitosan. Lower adsorption capacity has been noticed in unmodified chitosan-a maximum of 75.43 mg Ag(I)/g. Optimum contact time was 120 min and the process had a maximum efficiency when conducted at pH higher than 6. At the same time, a way is presented to obtain metallic silver from the adsorbent materials used for the recovery of the silver from aqueous solutions.